IDK MSD-804FD Series, Руководство пользователя

Страница: 68 / 233

MSD-804FD
User’s Guide
68
*1
If you set “LINK” to ON”, only horizontal size can be set. If you set the horizontal size, the current aspect
ratio is kept and vertical size is also set. If either horizontal or vertical size reaches the limit, you cannot
set the larger values.
*2
Only if you set “LINK” to “OFF”, you can set the vertical size.
2. To set the output size (the number of pixels) using commands:
@SOS: Set output size
@GOS: Get output size
7.3.12
Output masking [OUTPUT MASKING]
Unnecessary part (top/bottom and right/left) can be hidden by setting masking.
You can set masking for each input by following the “
7.3.8 Input masking [INPUT MASKING]
” menu or for
each output using this menu. Normally, set masking of each input in the settings of each input. If you want to
limit the display area on the output screen, set the masking for each output.
▪ Left side masking: Masked in a unit of pixel [Default]: 0
▪ Right side masking: Masked in a unit of pixel [Default]: Horizontal output resolution
▪ Top side masking: Masked in a unit of line [Default]: 0
▪ Bottom side masking: Masked in a unit of line [Default]: Vertical output resolution
( 0, 0 )
( Horizontal size, Vertical size)
Bottom masking
Top masking
Left
masking
Right
masking
[Fig. 7.13] Output masking
The range of set values depends on settings of
“
7.3.1 Output resolution [RESOLUTION]
”, “
7.3.10 Output
position [OUTPUT POSITION]
”, “
7.3.11 Output size [OUTPUT SIZE]
”, and masking. If you change the
output resolution, position or size, the display range before that change is kept and the settings of masking
are automatically changed. Default values (no masking) of the left and top sides are 0 while that of the right
and bottom sides are the input size.
1. To set the output masking (the number of pixels) using menu:
MSD-804FD
Top
↓
SET key
[FUNCTION SELECT]
OUTPUT TIMING
▲▼ keys: Select “OUTPUT TIMING”.
↓
SET key
For each output (common to OUTA and OUTB)