IDK MSD-804FD Series, Руководство пользователя

Страница: 67 / 233

MSD-804FD
User’s Guide
67
7.3.11
Output size [OUTPUT SIZE]
Out
put video size is scalable in reference to the upper left of video set in “
7.3.10 Output position [OUTPUT
POSITION]
”.
You can set the size for each output by using this menu or for each in
put by using “
7.3.7 Input size [INPUT
SIZE]
”. Normally, set position, size, and masking for each input in the settings of each input. If edges are cut
off due to enlargement display in the display device or if you want to enlarge output video of all channels at a
time, set the position for each output.
▪ Horizontal size: Scaled in a unit of pixel [Default]: Horizontal output resolution
▪ Vertical size: Scaled in a unit of line
[Default]: Vertical output resolution
[Horizontal size] [Vertical size]
[Fig. 7.12] Output size
The set range and default varies depending on settings of
“7.3.1 Output resolution [RESOLUTION] ”, and
the range is quarter to quadruple of output resolution. Default is the same as the resolution setting, and the
video is displayed on the full screen of the display device.
1. To set the output size (the number of pixels) using menu:
MSD-804FD
Top
↓
SET key
[FUNCTION SELECT]
OUTPUT TIMING
▲▼
keys: Select "OUTPUT TIMING".
↓
SET key
[OUTPUT TIMING]
OUTPUT SIZE
▲▼
keys: Select "OUTPUT SIZE".
↓
SET key
[OUT1SIZ]H:1920/1920
LINK:
O N V:1080/1080
▲▼ keys: Set “LINK” to “OFF” or “ON” for H and V.
*1
↓
◄►keys
[OUT1SIZ]H:192 0 /1920
LINK:ON V:1080/1080
▲▼ keys: Set horizontal display size of OUT1. Numbers following “/”
mean horizontal output resolution.
↓
◄►keys
[OUT1SIZ]H:1920/1920
LINK:OFF V:108
0 /1080
▲▼ keys: Set vertical display size of OUT1. Numbers following “/”
mean vertical output resolution.
*2
↓
ESC key: Returns to the previous screen.
For each output (common to OUTA and OUTB)