MSD-62 Series User’s Guide
89
9.8.7 Loading device data
Menu Top
→
INPUT TIMING
→
LOAD
Setting for Each input channel, each input signal
Device data with input timing can be loaded according to the input signal.
Press the MENU/SET key to apply the setting.
If there is no input signal on the input channel it shows “NOT AVAILABLE NOW” on the front VFD screen.
[Table 9.11] Items to be loaded
Input signal
Analog
Registered device data will be loaded.
For when:
- the synchronous signal frequency is the same and multiple device data having different
input timings are registered.
- you want to set the input timing again.
Digital
The value that is automatically detected by the MSD will be set.
Use this menu to restore the input timing to the original value.
9.8.8 Registering device data
Menu Top
→
INPUT TIMING
→
SAVE
Setting for Each input channel, each input signal, analog input only
Setting value No. 1 to No.99
You can register up to 99 analog RBG/analog YPbPr input timing settings, and you can name each device
data up to 14 characters using ASCII code 20 to 7D.
If you do not name the device table and press the MENU/SET key, the input resolution will be the device table
name automatically. If the device table name is already registered and press MENU/SET key without
specifying device table name, the input timing is saved to the device table name without changing the device
table name.
From the next time, video will be displayed at the registered timing when the same signal is input to other
channels.
Press the MENU/SET key to apply the setting.
If there is no input signal on the input channel, “NOT AVAILABLE NOW” appears on the front VFD screen.
9.8.9 Tracking
Menu Top
→
INPUT TIMING
→
TRACKING
Setting for Each input channel, each input signal, analog input only
Setting value 0 to 63 [Default]0
You can adjust the tracking of analog RGB/analog YPbPr input video.
If there is no input signal on the input channel, “NOT AVAILABLE NOW” appears on the front VFD screen.
