IDK MSD-402, Руководство пользователя

Страница: 97 / 120

MSD-402 User’s Guide
97
8.13.6 Input channel assignment
Menu BITMAP
→
CHANNEL ASSIGN
Setting for Each input channel, each output channel
Setting value Input channel : IN1 to IN4 [Default] IN1
Registered bitmap : OFF [Default] BITMAP1 ON to BITMAP4 ON
A bitmap can be treated as an input video source by assigning the bitmap to any input that is not currently
being used. Set “ 8.13.2 Outputting bitmap image ” to “OFF”.
If you switch a normal image to a bitmap image, it takes longer time to output the image, and you cannot
perform other operations while the bitmap is being written and displayed.
If a bitmap is assign to an input channel, it is subject to the “8.8.12 Priority of input channel automatic
switching”.
If no bitmap is registered, you cannot set this menu.
8.13.7 Bitmap output at startup
Menu BITMAP
→
POWER ON BITMAP
Setting for Each output channel
Setting value OFF [Default], BITMAP1 ON to BITMAP4 ON
You can enable or disable bitmap output at the time of the MSD startup.
If no bitmap is registered, you cannot set this menu.
8.13.8 Dividing memory area
Menu Top
→
BITMAP
→
DIVIDE MEMORY
Setting value [Table 8.24] Dividing memory area
You can register up to four bitmaps.
To register multiple bitmaps, divide the memory area using one of three modes. Each memory area is
controlled by blocks. 1 block = 64K bytes; 128 blocks = 8M bytes in total
Click the “SET” button to open the dialog box and then click the “OK” button to initialize settings.
[Table 8.24] Dividing memory area
Setting item Setting value Default
MODE (dividing mode) RESIZE,DELETE,AUTO RESIZE
NUMBER (the number of partitions) 1 to 4 1
DISPLAY (displaying method) BLOCK,BYTE BLOCK
End block position 0 to 128 128