MSD-402 User’s Guide
94
8.13.2 Outputting bitmap image
Menu BITMAP
→
BITMAP OUTPUT
Setting for Each output channel
Setting value OFF [Default], ON (BITMAP1 ON to BITMAP4 ON)
You can enable/disable the bitmap image output.
If several bitmaps are registered, select the bitmap number you want to output.
If no bitmap is registered, you cannot set this menu.
8.13.3 Background color
Menu BITMAP
→
BACKGROUND COLOR
Setting for Each output channel, each bitmap
Setting value R / G / B: 0 to 255 [Default]: R / G / B: 255 (white)
You can set the background color of bitmap.
If you check the “RGB LINK” check box, only ”R” can be set, and “G” and “B” are set automatically according
to the setting of “R”.
If no bitmap is registered, you cannot set this menu.
