MSD-402 User’s Guide
63
8.8.6 Wipe color
Menu OUTPUT SETTING
→
WIPE COLOR
Setting for Each output channel
Setting value R / G / B: 0 to 255 [Default]: R / G / B: 0 (black)
You can set the wipe color while switching video input when the input channel is switched.
If you check “RGB LINK” check box, only settings of ”R” can be set, and “G” and “B” change relatively.
8.8.7 HDCP output
Menu OUTPUT SETTING
→
HDCP OUTPUT MODE
Setting for Each output channel
Setting value ALWAYS
: HDCP is output at all time. [Default]
DISABLE
: HDCP is not authorized (only video and audio without HDCP are
output)
HDCP INPUT ONLY
: HDCP is output only if input signal has HDCP.
You can set the HDCP output for when a sink device supporting HDCP is connected.
Normally set this menu to “ALWAYS”. The MSD output signal with HDCP always.
If you select “DISABLE”, the MSD never conducts HDCP authentication. Only the input signal which does not
have HDCP can be output.
If you select “HDCP INPUT ONLY”, the MSD conducts HDCP authentication only if the input signal has HDCP.
However, if input channel is changed to others and HDCP authentication status is changed, the MSD starts
HDCP authentication again. This action may take time to output video and audio.
If the sink device which does not support HDCP is connected, the MSD can output only the video and audio
which do not have HDCP regardless this menu.
8.8.8 The number of HDCP retries
Menu OUTPUT SETTING
→
HDCP ERROR RETRY
Setting for Each output channel
Setting value ETERNITY
: retry until succeeded [Default],
0 to 100
: 0 to 100 times
You can set the number of HDCP retries.
If a sink device with HDCP is connected and you set “
to “ALWAYS” or “HDCP INPUT
ONLY”, HDCP is authorized regardless of the status of input signal. Normally, set this menu to “ETERNITY” to
retry the authentication automatically after the first authentication fails. However, you can set the number of
retries manually. (If retry is not succeeded even after the MSD retries for the set number of retry times, video
and audio with HDCP are not output.)
