NJR-CTB Command Guide
14
4.3 Parameter input format
Specify the target channel in order to control multiple NJR-T01UHDs and NJR-R01UHDs connected through
a network switch.
Example: The command for setting mute of digital audio output
Format
@SAM, device, ch, port, mute
Parameter
device: Model type
1 = NJR-T01UHD, 2 = NJR-R01UHD
ch: Channel
1 to 512 = Channel1 to Channel512
If a command is input from the RS-232C port of NJR-T01UHD/NJR-R01UHD or
from IP-NINJAR Configurator (Software for setting IP-NINJAR) through LAN, the
value is
“1” (static).
port: Connector
“1” (static)
mute: Audio mute
0 = Mute OFF [Default], 1 = Mute ON
10 GbE switch
LAN cable
Fiber optic cable
@SAM,1,64,1,1
PC for control
NJR-T01UHD (Transmitter)
NJR-R01UHD (Receiver)
Input channel1
LAN cable
NJR-T01UHD (Transmitter)
NJR-R01UHD (Receiver)
Input channel64
Output channel1
Output channel64
@SAM,2,1,1,1
NJR-CTB
[Figure 4.1] Command input from NJR-CTB
