HDC-RH401/201/101 Users Guide
65
Problem
Check item
Page
Audio output
Audio is not output.
Verify that audio output is set to ON.
Connected sink device or AV amp select the resolution which can
output audio? If you select PC resolutions (VGA to WUXGA), there
is a case those units cannot output audio.
Connected sink device ot AV amp support output sampling
frequency? There is a case that LCD monitor cannot output higher
sampling frequency such as higher that 88.2kHz. If this is the case
you can limit output sampling frequescy from input by EDID.
Compressed audio
(such as Dolby
Digital and DTS) is
not output from the
source device.
Inputting compressed audio is limited by the EDID setting(factory
default). In order to use compressed audio, change the EDID
setting.
Verify audio output setting of input device
-
If additional assistance is required, please perform the following tests and then contact us.
1. The problem occurs in all connectors?
2. Connect the devices using genuine cables without connecting the HDC