HDC-RH401/201/101 Users Guide
31
・
Setting by menu
Normal condition (OFF)
↓ SET key
“
－
” “
＋
” key set INPUT EDID
→ select F10
↓ SET key
“
－
” “
＋
” key select EDID number which you want to set. [Default: 3: 1080p]
↓ SET key
During EDID copy is processing, READY LED is OFF. After copying is finished, the LED is ON.
If there is connection error, error on reading EDID, error on writing EDID, or checksum error
occurred, ERROR LED is ON. Please copy EDID again.
↓
After processing, 7-SEGMENT LED goes back to menu.
8.5 [ F12 ] Setting external EDID
Note:
Set this menu before setting the EDID resolution to “EXTERNAL (External EDID)”.
・
Setting by menu
Normal condition (OFF)
↓ SET key
“
－
” “
＋
” key setting INPUT external EDID
→ select F12
↓ SET key
“
－
” “
＋
” key select output connector [Default: 01: HDC OUTPUT]
HDC OUTPUT
→ 01, OUTPUT1 → 02, OUTPUT2 → 03, OUTPUT3 → 04,
OUTPUT4
→ 05
※
HDC-RH201 cannot select 04 and 05.
※
HDC-RH101 cannot select 03, 04, and 05.
↓ SET key
During EDID copy is processing, READY LED is OFF. After copying is finished, the LED is ON.
If there is connection error, error on reading EDID, error on writing EDID, or checksum error
occurred, ERROR LED is ON. Please copy EDID again.
↓
After processing, 7-SEGMENT LED goes back to menu.
