DDC-03UHD User
’s Guide
24
READY LED
Illuminates green
●
Another EDID is already recorded in
the DDC-03UHD.
READY LED
Illuminates green
ERROR LED
Flashes red
●
EDID that is copied from monitor is
not recorded in the DDC-03UHD.
[Fig. 7.7] ERROR / READY LEDs
3.
After ensuring that the Error LED flashes or does not illuminate, press the EDID READ button
using a sharp-ended object (e.g. pencils) to copy the EDID of the monitor.
[Fig. 7.8] Copying EDID
Note:
If the rotary switch is set to
“0” to “E”, the ERROR LED illuminates red for a second, and the EDID is not
copied to the DDC-03UHD. Change the setting of the switch to
“F” and press the EDID READ button again.
If the EDID cannot be copied for some reasons or if the target EDID has problems, the ERROR LED
illuminates red. In such a case, check the cable connection and press the EDID READ button again to retry
the copy procedure.
ERROR LED
Illuminates (Red)
READY LED
Does not illuminate
●
EDID is being copied correctly.
●
EDID cannot be copied.
[Fig. 7.9] READY / ERROR LED while EDID is being copied
