Part 1 – Introduction
17
USB 3.0 Port
1
2
34
5
7 8
9
0
6
●
Storage Device Connection
Connect an external USB hard drive or a USB flash
memory device to one of the USB ports for use with
the Clip Copy feature. The external storage device
should be placed as close to the DVR as possible. It is
recommended that you use a connection cable that is
no longer than 180cm in length. Use the connection
cable included with your external storage device to
connect the device to one of DVR's USB ports. For
more information Clip Copy, refer to the
Clip Copy in
the operation manual
.
●
Peripheral Device Connection
Use the USB ports to connect peripherals such as a
USB mouse to the DVR. You can also use a USB-to-
serial converter and connect multiple text-in devices
to the DVR at the same time.
For USB flash memory devices, the DVR supports
the FAT32 file format only.
Audio Connection
1
2
4 5
6
3
7
8
9
0
Connect the audio device to the
AUDIO IN
port and
speakers with a built-in amplifier to the
AUDIO OUT
port.
Use the
AUDIO OUT
port to listen to audio from analog
cameras.
Use the
AUDIO IN
port to establish two-way
communication with cameras.
•
This DVR does not feature a built-in audio amplifier
unit and therefore requires the user to purchase a
speaker system with a built-in amplifier separately.
It's possible to connect an amplified audio source to
the DVR, but microphones that do not have a built-
in amplifier will not function properly if connected
to the DVR directly. If this is the case, connect the
microphone to the DVR via a pre-amp.
•
Check your local laws and regulations on making
audio recordings.
Power Cable Connection
Connect the power cable to this port. This DVR does not
feature a separate power on/off button and will turn on
the moment power is supplied.
1
2
4 5
6
3
7
8
9
0
•
Organize the power cable so that it will not cause
people to trip over or become damaged from chairs,
cabinets, desks, and other objects in the vicinity. Do
not run the power cable underneath a rug or carpet.
•
The power cable is grounded. Do not modify the
power plug even if your power outlet does not have
a ground contact.
•
Do not connect multiple devices to a single power
outlet.
