Part 2 - Configuration
68
Video-Analytics_Tampering
●
No.
: Select which cameras to apply Tampering to.
●
Sensitivity
: Set to between 1 (Low) and 5 (High).
●
Activation Time
: Specify how long tampering
detection needs to last in order for it to be considered
an event. Tampering detections that do not last for
the specified duration of time will not be considered
as events.
●
Actions
: Specify which actions to take when
Tampering is detected.
–
Record
: Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to
Event
or
Time & Event
mode, the selected
cameras will begin linked recording when an event
occurs.
–
Alarm-Out
: Designate event-triggered alarm-out
channels (each for the NVR and camera) and beeps.
–
Notify
: Configure to be notified of events by Mail,
LAN1 through 5, Push, FTP, and/or Alert Window.
–
PTZ
: Moves the PTZ camera to a specific preset
position when an event occurs.
–
Event Monitoring:
Selects the cameras to monitor
when an event occurs.
In order to use the Callback feature, the NVR must be
registered on the remote program.
●
Use Ignoring Time
: Select
Time Setup
to specify
the tampering detection ignore time. Tampering
detection will be disabled during the specified time
frame.
Video-Analytics_Face Detection
When face detection event occurs in the selected
camera, the area that the face is detected displays on
the screen.
●
No.:
Select which cameras to apply Face Detection to.
●
Sensitivity
: Set sensitivity settings between 1 (Low)
and 5 (High).
●
Max
. Detect Count: Set the maximum detected
number of face as 8 or 32.
When you set the Max. Detect Count as 32, the
sensitivity feature will be disabled.
●
Min. Face Size:
Select 120 x 120, 150 x 150, 180 x180,
210 x 210 or 240 x 240.
●
Actions:
Specify which actions to take when a Face
Detection event occurs.
–
Record:
Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to Event or Time & Event mode, the selected
cameras will begin linked recording when an event
occurs.
–
Alarm-Out:
Designate event-triggered alarm-out
channels (each for the NVR and camera) and beeps.
–
Notify
: Configure to be notified of events by Mail,
LAN1 through 5, Push, FTP, and/or Alert Window.
–
PTZ:
Moves the PTZ camera to a specific preset
position when an event occurs.
–
Event Monitoring:
Selects the cameras to monitor
when an event occurs.
•
In order to use the Callback feature, the NVR must
be registered on the remote program.
•
In case of the camera that not supports face
detection event, the face detection feature will
be disabled.
●
Ignoring Interval:
The system does not produce
event log entries or issue remote notifications
regarding face detected for the time specified
after the initial motion was detected. Set the value
between 1 sec and 5 secs or choose Never.
