manualshive.com logo in svg

Idis DR-6232P-S, Руководство по эксплуатации, Страница: 90 / 92

Поделиться
Скачать
Idis DR-6232P-S Скачать руководство пользователя страница 90

Part 4 - IDIS Web

90

!

Select the camera you wish to search. Use the arrow buttons to navigate to the previous/next camera 
group.

@

Zoom in or out on the video.

#

Adjust image brightness.

$

Apply image filters (Sharpen, Blur, Equalizer, Interpolation, and Revert)
to the images.

Image calibration is applied only during the paused state.

%

Use the calendar to search for video recordings by specific dates.
Dates containing video recordings are highlighted in light blue. Selecting a date containing video 
recording data loads the earliest recording from that date(paused state). Selected date is highlighted in 
orange.

^

Select 

TYPE 1

 

to enable time lapse search mode and search/play back video recordings in chronological 

order. In Time Lapse Search mode, search is conducted by selecting days on the calendar. The time table 
at the bottom displays recording data information for the selected date. Select a point in time to display 
video from that moment. If multiple recordings are available for the selected point in time, you can select 
the desired segment.

&

Select 

 

to enable event search mode and search for events matching user-designated parameters.

*

Use the playback controls to play back video.

TYPE 1

 

Go to First

TYPE 1

 

Play by Frame (forwards)

TYPE 1

  

Rewind

TYPE 1

 

Fast Forward

TYPE 1

Play by Frame (backwards)

TYPE 1

 

Go to Last

TYPE 1

 

Play/Pause

(

Click 

 to designate recent recordings you wish to search and then jump to a specific point in the 

recording.

)

Click 

 to reload recent video recordings from remote locales.

a

Indicates the selected camera’s recording data on a time bar. If the camera’s system clock has been 
changed to a point in the past and more than one recording exists at the same point in time as a result, 
you will be able to choose which segment to search from the segment menu on the upper right portion 
of the time table.

b

Select a camera from the screen and right-click to bring up the pop-up menu.

 

●

Change Camera Title

: Used to change the camera's name.

Renaming the camera in Web Search mode does not affect the camera's name 
on the remote system. If no name is entered for the camera, the name used at 
the remote locale is shown on the screen.

 

●

Enable Audio

: If audio was recorded with the video, enabling this option plays audio upon playback 

(limited to single-screen playback).

 

●

Aspect Ratio

: Changes the aspect ratio of the video displayed on the screen.

 

●

Anti-Aliasing Screen

: Removes stair step effect (blocks) that is caused when zooming a video to 

improve overall quality of video output.

V3.0 

Содержание DR-6232P-S





























































































Отзывы:

Нет отзывов