Idis DC-TH Series, Руководство по установке, Страница: 9 / 14

9 DC-TH 201x Installation Guide
2.3 When using VMS on PC
2.3.1 Connecting to VMS through NVR
2.3.2 Connecting to VMS Directly
As mentioned in ‘1.3.2 Connect with VMS on PC (IDIS Center & ISS Client)’ , there are two ways to
connect DC-TH201x to VMS.
When connected to PC through NVR and the motion alarm is generated triggering the ‘Event Max
Temperature’, Event is sent properly to VMS.
When connected to VMS directly, the Event comes in as motion alarm as the below screenshot.
※ Note: When the resolution of the camera changes it takes about a minute for ISS to receive the event from the
camera.