Idis DC-T6243HRX, Руководство по эксплуатации

Страница: 39 / 53

Part 1 - Remote Setup
39
Loitering
Select
Loitering
and configure loitering settings. With
loitering event enabled, an event is considered when
an object is detected to wander for a certain period of
time.
DC-T6233HRX, DC-T6243HRX, DC-T6234HRX only
•
Area
: Click
Setup
and define the loitering area using
blocks.
- (Select)/ (Unselect) : Enable/disable loitering
blocks.
- (Single Block) : Select/unselect loitering blocks
individually.
-
(Zone)
: Select/unselect multiple loitering blocks.
- (All) : Select/unselect all loitering blocks.
-
(Polygon)
: Select/unselect polygon loitering
blocks by the number of points. Some models only
Polygon is not supported in IE 10 or earlier.
•
Min. Inside Time
: Select the minimum time to detect
loitering. The loitering taking place more of the
defined time in the defined area will be assumed as
events.
• Ignore Interval : With Loitering Ignoring Interval
configured, no event log or notification is generated
for loitering detected during a period of time
following a loitering event.
•
Use Ignoring Time
: Define the event ignoring time.
Loiterings taking place during the defined time range
will not be assumed as events.
Object Calibration:
Set the camera’s mounting
position, sensitivity, and the maximum and minimum
size of the object to recognize the object more
accurately.
- Zone : Select the maximum and minimum size of
the object to be measured.
- Mount Type: Set the appropriate value for the
installed camera position. Wall is selected when the
camera is installed on the wall, and
Ceiling
is when
the camera is installed on the ceiling. Depending on
the installed location, the recognition rate may vary.
-
Sensitivity:
Select sensitivity for object
measurement.
• Event Action : Select a loitering event alert action.
-
Alarm Out
: Select if you wish to generate an alarm
out.
-
Send Email
: Select if you wish to send an email.
Select the Image Attachment option to attach a
.jpg image of the event detected to the email.
-
Remote Callback
: Select this option to send a
message to a remote system and then select which
system to send the message to.
• Not supported from the IDIS Web program.
• The camera must be registered to the remote
system in order to use the
Remote Callback
feature.
-
Audio Alarm
: Select this option to generate an
audio alert and then choose an audio file.
- FTP Upload : Select this option if you wish to
upload images to the FTP server.
- Record : Select this option to record video.
• Event Action settings must be configured
correctly in order to perform event actions.
• The recognition rate may decrease in low-light
images.