Idis DC-T6243HRX, Руководство по эксплуатации

Страница: 35 / 53

Part 1 - Remote Setup
35
- (Polygon) : Select/unselect polygon trip zone
blocks by the number of points.
Some models only
Polygon is not supported in IE 10 or earlier.
- Trip Direction : Define in which direction the
motion has to occur in order for it to be considered
as an event. Select
In
for movement occurring from
outside the trip zone in and
Out
for movement
occurring from inside the trip zone out.
•
Motion Ignoring Interval
: With Motion Ignoring
Interval configured, no event log or notification is
generated for motions detected during a period of
time following a motion detection event.
• Use Ignoring Time: Define the event ignoring time.
Trip-Zone taking place during the defined time range
will not be assumed as events.
DC-T6233HRX, DC-
T6243HRX, DC-T6234HRX only
•
Object Calibration:
Set the camera’s mounting
position, sensitivity, and the maximum and minimum
size of the object to recognize the object more
accurately.
DC-T6233HRX, DC-T6243HRX, DC-
T6234HRX only
- Zone : Select the maximum and minimum size of
the object to be measured.
-
Mount Type:
Set the appropriate value for the
installed camera position. Wall is selected when the
camera is installed on the wall, and Ceiling is when
the camera is installed on the ceiling. Depending on
the installed location, the recognition rate may vary.
- Sensitivity: Select sensitivity for object
measurement.
• Daytime : Specify when daytime starts and ends.
All other times will be assumed as nighttime. DC-
T3233HRX, DC-T3243HRX, DC-T3234HRX only
• Event Action : Select a trip zone event alert action.
-
Alarm Out
: Select if you wish to generate an alarm
out.
-
Send Email
: Select if you wish to send an email.
Select the
Image Attachment
option to attach a
.jpg image of the event detected to the email.
-
Remote Callback
: Select this option to send a
message to a remote system and then select which
system to send the message to.
• Not supported from the IDIS Web program.
• The camera must be registered to the remote
system in order to use the
Remote Callback
feature.
- Audio Alarm : Select this option to generate an
audio alert and then choose an audio file.
-
FTP Upload
: Select this option if you wish to
upload images to the FTP server.
-
Record
: Select this option to record video.
• Event Action settings must be configured
correctly in order to perform event actions.
• The recognition rate may decrease in low-light
images.