9
8
Part Names and Functions
• Lens:
Optical zoom lens is installed.
• IR LED:
A sensor in the bottom middle monitors lighting levels and activates the IR LED
during low-lighting conditions.
• Stand:
Allows you to adjust the camera direction and lens’ rotation angle. Twist the
setscrews counterclockwise and move the camera to the desired direction. Once it is set,
twist the setscrews clockwise to lock it.
• Bottom Cover:
Allows you to mount the camera to the wall or ceiling using the
mounting bracket provided with the camera.
• Mounting Bracket:
Allows you to mount the camera to the wall or ceiling.
• Cable:
Refer to the
Cable.
• Sun Shield Screw Hole:
Allows you to screw the sun shield to the camera.
• Factory Reset Switch:
If you turn the lid on the bottom of the product counterclockwise,
there is a switch. It is used only to return the set value to the factory default setting. For
details, refer to the “Factory Reset” section below.
• Power LED:
Turn the lid on the bottom of the appliance counterclockwise and the LED
will be on. Displays the operating status of the system. For details, refer to “Appendix -
LED indication”.
• LED Level Control Switch:
If you turn the lid on the bottom of the product
counterclockwise, there is a switch. Adjust the brightness of the IR LED.
①
①
⑦
②
②
③
③
④
⑤
⑥
①
Lens
②
Stand
③
IR LED
④
Bottom Cover
⑤
Cable
⑥
Mountin Bracket
⑦
Sun Shield Screw Hole
①
Factory Reset Switch
②
Power LED
③
LED Level Control Switch
English
English
