DC-S3283EX Explosion-proof Speed Dome camera
10
2.3 Preparation of brackets before installation
Since Ex product is very special, we suggest that it is better to do debugging with
power before installation if available. After you are familiar with Ex product
’s
operation, then do the site installation. The debugging is done before package, only
installation in the intended location is
required. We strongly suggest you select brackets from IDIS , it will ease your
installation
process significantly.
It’s the user’s responsibility to ensure the bracket for the camera is strong enough,
and the fasteners comply with associate load and anti-rust requirements. Installation
of the camera shall ensure that it’s out of reach by human beings and there is no
other subject may affect the rotation of the camera; otherwise, falling or damage may
happen, even personnel safety may be harmed.
2.3.1 bracket installation
After open package, select installation holes in proper positions for wall/ceiling mount
bracket. The first step is to ensure the direction of the camera is correct, and then
fasten the wall mounting bracket with hexagonal bolt.
Junction box is always installed in positions that easy for installation and
maintenance, as per Figure 2.3.1.1. The cable is connected to junction box by wire
casings or bridges.
Specification of the bracket see Figure 2.3.1.2, 2.3.1.3.
Figure 2.3.1.1 Installation of bracket
Wire casing
or bridge
Ex box
Wall
Bracket
