DC-S3283EX Explosion-proof Speed Dome camera
9
Cautions in service:
It’s not suggested for users to dismantle this product at will, please follow the
Instruction for operation.
The power must comply with requirements specified in 1.5.
Please use this product in conditions (atmosphere pressure, temperature and
humidity) specified in chapter 1.6.
Since Ex product is very special, debugging with power before installation if
available.
No extra load on the camera, extra load may cause malfunction or damage!
After the inspection of the factory products are not allowed to change the part
which has impact on explosion-proof performance.
Internal and external grounding shall be reliable .The grounding wire resistance
should be less than 1
Ω
. The ground resistance should less than 1
Ω
.
2.2 Cable entry
There are one cable entries in the horizontal shaft in packaged product, thread spec.
is M27×1.25.please use with ATEX/IECEx certified cable glands with sealing
compound, the Ex marking shall be Ex db IIC Gb or/and Ex tb IIIC Db IP66,IP68 or
higher protection level.
Follow the instruction of the cable gland for correct installation.
