Part 1 – Introduction
14
Outdoor
In case that a universal nut is attached to a pipe
Connect the sun shield and outdoor bracket first, then
connect it to the pipe as follows:
1
Remove the install screw from the camera body.
2
Screw the sun shield to the camera body by using
the M3 screws provided with the camera.
3
Hook the safety wire of the outdoor bracket on the
safety wire ring of the camera body.
4
Use the provided M5 screws to secure the outdoor
bracket on to the sun shield.
5
Connect the cable from the camera to the pipe.
6
Turn the universal nut to connect the camera to the
pipe.
7
Connect external devices, the network cable, and
the power adapter.
8
Supply the power.
In case that a universal nut is not attached to a pipe
Connect the sun shield to the outdoor bracket as
follows:
