Idis DC-F1211, Руководство по эксплуатации

Страница: 14 / 42

14
Configure basic network camera settings and all other
system settings.
Screen images may vary depending on the model.
Camera Protocol
Camera supports DirectIP™ and IDIS protocols.
• DirectIP™ protocol:
- Using with a DirectIP™ NVR enables camera use
without the need to configure network settings.
- The DirectIP™ NVR also allows you to control all
camera settings directly from the NVR, without the
need for a computer.
For more information on configuring camera
settings from a DirectIP™ NVR, refer to the DirectIP™'s
operation manual.
• IDIS protocol:
- Control the camera over the network from software
installed on a computer or a separate NVR.
- Ideal for using the camera over the network from a
remote location.
Remote Setup
1
Launch the IDIS Discovery program and then from
the main screen select a network camera whose
protocol you wish to change.
2
Click on the Setup icon and then select Setup
→
Protocol Setup. A Protocol Setup screen will
appear.
• Alternatively, you can select Network Camera
from the main screen and then right-click to access
the Protocol Setup screen.
3
From the Protocol Setup screen, select the IDIS and
then click OK.
4
Click on the Setup icon and then select Setup
→
Remote Setup. A Remote Setup screen will appear.
• Alternatively, you can select Network Camera
from the main screen and then right-click to access
the Remote Setup screen.
• This operation manual has been composed based
on IDIS protocol use.
• System settings can also be changed using a remote
program.
Part 3 - Remote Setup