Idis DC-F1211, Руководство по эксплуатации

Страница: 10 / 42

Part 1 – Introduction
10
Camera surveillance may be prohibited by laws that
vary by region. Check the laws in your area before
using this product for surveillance purposes.
The network connector is not designed to be
connected directly with cable or wire intended for
outdoor use
.
Factory Reset
Only use the factory reset button to restore the camera
to its factory default settings.
A factory reset will clear all camera settings configured
by the user.
1
Shut off the power supply, separate the dome cover
from the camera body and push the factory reset
buttons.
2
Hold the button down and reconnect the power.
3
After connecting the power, wait 5 seconds and
then take out hands from the button.
4
The device will go through the resetting process and
reboot. All camera settings will be restored to their
factory defaults after the reboot.
5
Connect the dome cover to the camera body.
It's also possible to do a factory reset by pressing and
releasing the reset button while the camera is turned
on or using the IDIS Discovery program from a remote
location. A factory reset will reboot the system. For more
information on resetting the camera remotely, refer to
the IDIS Discovery operation manual.
Installation
Installation of this product does not require the use of
special tools.
For more information on other devices comprising the
overall system, refer to their respective installation
manuals.
Product color and design may vary depending on the
model.
Installation
Check the wall or ceiling to see if it needs to be
reinforced. The camera may fall off if the wall or ceiling
is not strong enough to support its weight.
1
Screw the camera body to the wall or ceiling by
using the mounting screws provided with the
camera.
2
Screw the dome cover to the camera body.
3
Connect external devices and the network cable.