Part 1 - Remote Setup
37
-
Sensitivity:
Select sensitivity for object
measurement.
•
Event Action
: Select a line cross event alert action.
-
Alarm Out
: Select if you wish to generate an alarm
out.
-
Send Email
: Select if you wish to send an email.
Select the
Image Attachment
option to attach a
.jpg image of the event detected to the email.
-
Remote Callback
: Select this option to send a
message to a remote system and then select which
system to send the message to.
•
Not supported from the IDIS Web program.
•
The camera must be registered to the remote
system in order to use the
Remote Callback
feature.
-
Audio Alarm
: Select this option to generate an
audio alert and then choose an audio file.
-
FTP Upload
: Select this option if you wish to
upload images to the FTP server.
-
Record
: Select this option to record video.
•
Event Action
settings must be configured
correctly in order to perform event actions.
•
The recognition rate may decrease in low-light
images.
Loitering
Select
Loitering
and configure loitering settings. With
loitering event enabled, an event is considered when an
object is detected to wander for a certain period of time.
DC-D6233HRX, DC-D6243HRX only
•
Area
: Click
Setup
and define the loitering area using
blocks.
-
(Select)/ (Unselect)
: Enable/disable loitering
blocks.
-
(Single Block)
: Select/unselect loitering blocks
individually.
-
(Zone)
: Select/unselect multiple loitering blocks.
-
(All)
: Select/unselect all loitering blocks.
-
(Polygon)
: Select/unselect polygon loitering
blocks by the number of points.
Some models only
Polygon is not supported in IE 10 or earlier.
•
Min. Inside Time
: Select the minimum time to detect
loitering. The loitering taking place more of the
defined time in the defined area will be assumed as
events.
•
Ignore Interval
: With Loitering Ignoring Interval
configured, no event log or notification is generated
for loitering detected during a period of time
following a loitering event.
•
Use Ignoring Time
: Define the event ignoring time.
Loiterings taking place during the defined time range
will not be assumed as events.
Object Calibration:
Set the camera’s mounting position, sensitivity, and
the maximum and minimum size of the object to
