Part 1 - Remote Setup
36
•
Event Action
: Select a tampering detection event
alert action.
-
Alarm Out
: Select if you wish to generate an alarm
out.
-
Send Email
: Select if you wish to send an email.
Select the
Image Attachment
option to attach a
.jpg image of the event detected to the email.
-
Remote Callback
: Select this option to send a
message to a remote system and then select which
system to send the message to.
•
Not supported from the IDIS Web program.
•
The camera must be registered to the remote
system in order to use the
Remote Callback
feature.
-
Audio Alarm
: Select this option to generate an
audio alert and then choose an audio file.
-
FTP Upload
: Select this option if you wish to
upload images to the FTP server.
-
Record
: Select this option to record video.
Event Action
settings must be configured correctly
in order to perform event actions.
Line Cross
Select
Line Cross
and configure line cross settings.
With line cross event enabled, an event is considered
when an object is detected to move a set line in a set
direction.
DC-D6233HRX, DC-D6243HRX only
•
Line
: Click
Setup
and define up to 8 lines and
directions.
-
Select / Unselect:
Select/unselect lines.
-
Line Cross Direction
: Select the direction in which
the object to be considered an event is skipped.
is when a movement is made from A to B on a
line basis,
is
when a movement is made from A
to B on a line basis, and
is
when a movement is
made in both directions.
•
Ignore Interval
: With Line Cross Ignoring Interval
configured, no event log or notification is generated
for line crosses detected during a period of time
following a line cross event.
•
Use Ignoring Time
: Define the event ignoring time.
Line cross detections taking place during the defined
time range will not be assumed as events.
Object
Calibration:
Set the camera’s mounting position,
sensitivity, and the maximum and minimum size of
the object to recognize the object more accurately.
-
Zone
: Select the maximum and minimum size of
the object to be measured.
-
Mount Type:
Set the appropriate value for the
installed camera position.
Wall
is selected when the
camera is installed on the wall, and
Ceiling
is when
the camera is installed on the ceiling. Depending on
the installed location, the recognition rate may vary.
