Idis DC-D1223WX', Руководство по эксплуатации

Страница: 22 / 46

Part 1 - Remote Setup
22
Streaming
•
Primary/Secondary/Tertiary/ Quaternary
:
Multistreaming is supported (priority: Primary >
Secondary > Tertiary > Quaternary). Enable/disable
streaming use.
•
Compression
: Choose the streaming compression
method.
•
Resolution
: Choose a resolution setting for video
streaming.
•
Quality
: Choose a quality setting for video streaming.
• Target Bitrate (Kbps): Set the target bitrate. When
Quality
is set to
Manual
, you can configure the value
of target bitrate. If not, it appears the set value of the
target bitrate for each
Quality .
•
Frame Rate
: Choose a frame rate setting for video
streaming.
•
Default Record Stream
: Choose a stream to use
for recording. This setting, however, may not apply
if a recording stream has been designated from the
remote program or the SD memory card recording
feature has been enabled. For more information, refer
to the
Settings on page 30
.
• Multi-View Streaming : Designate a specific area of
the screen and stream images from that area only.
(not supported for the primary stream) Click
Setup
to
designate a streaming area.
Select On and then specify the streaming area’s
resolution.
- Resolution Limit : Indicates the maximum
resolution that can be set for the streaming area.
- Resolution : Designate a streaming area.
Designated area is marked in red on the screen. You
can adjust the resolution of the area or reposition
the area by dragging and dropping using the
mouse.
-
Current Resolution
: Displays the resolution of the
designated streaming area.
•
Video Output
: Display whether the BNC video
output works or not. The BNC video out may not work
depending on the settings under
Video > Streaming .
If multiple users are connected to the camera, the
increase in bandwidth use can lower the frame rate.