Idis DC-D1011, Руководство по эксплуатации

Страница: 38 / 54

Part 1 - Remote Setup
38
Trip-Zone
Select Trip-Zone to configure trip zone event settings.
With trip zone event enabled, motion detected inside/
outside the selected area will be assumed as an event.
TYPE 1
TYPE 2
•
Sensitivity
: Select daytime and nighttime motion
detection sensitivity levels. Higher values will result in
more sensitive motion detection.
•
Trip-Zone
: Click
Setup
and define the trip zone using
blocks.
-
(Select)/ (Unselect)
: Enable/disable trip zone.
- (Single Block) : Select/unselect trip zone blocks
individually.
-
(Zone)
: Select/unselect multiple trip zone blocks.
-
(All)
: Select/unselect all trip zone blocks.
- Trip Direction : Define in which direction the
motion has to occur in order for it to be considered
as an event. Select
In
for movement occurring from
outside the trip zone in and
Out
for movement
occurring from inside the trip zone out.
• Motion Ignoring Interval : With Motion Ignoring
Interval configured, no event log or notification is
generated for motions detected during a period of
time following a motion detection event.
•
Daytime
: Specify when daytime starts and ends. All
other times will be assumed as nighttime.