Part 1 - Remote Setup
23
Streaming
•
Primary/Secondary/Tertiary/Quaternary
:
Multistreaming is supported (priority: Primary >
Secondary > Tertiary > Quaternary). Enable/disable
streaming use. The lower stream settings may change
depending on higher stream settings. The tertiary and
quaternary streams may not be available depending
on higher stream settings (refer to the table below).
Primary
Secondary
Tertiary,
Quaternary
Resolution
ips
Resolution
ips
Resolution
ips
3840x2160
30
1280x720
1
—
—
•
Compression
: Choose the streaming compression
method.
•
Resolution
: Choose a resolution setting for video
streaming. The resolution varies depending on the
camera model. The current stream resolution cannot
be higher than the higher stream resolution.
•
Quality
: Choose a quality setting for video streaming.
•
Bitrate Control
: Choose a bitrate control mode for
H.264 compression.
-
VBR (Variable Bitrate)
: Bitrate varies depending
on motion changes in the video. Less movement
places less load on the network and takes up less
storage space.
•
Frame Rate
: Choose a frame rate setting for video
streaming. The fame rate of the current stream cannot
be higher than the fame rate of the higher stream if
those stream resolutions are same.
•
Default Record Stream
:
Choose a stream to use
for recording. This setting, however, may not apply
if a recording stream has been designated from the
remote program or the SD card recording feature has
been enabled.
•
Multi-View Streaming
: Designate a specific area of
the screen and stream images from that area only.
(not supported for the primary stream) Click
Setup
to
designate a streaming area.
