iDirect iQ Desktop+, Инструкция по установке, поддержке и обслуживанию

Страница: 39 / 52

Installation, Support, and Maintenance Guide 27
iQ Satellite Router
Coax Cable Preparation
2. Remove the jacket material and foam insulation according to the length defined under
Length A in Table B-1 . For RG-6, use a two-step Coax Stripper such as the LC-CST 1257
from Paladin Tools.
3. Remove any foil in the braid as shown in Figure B-2 .
Figure B-2. Cutting Technique for Removing Foil in the Braid
4. Fold the braid back over the jacket and trim the braid to the length as defined under
Length C in Table B-1 on page 27 and Figure B-3 .
Table B-1. Coax Trim Dimensions
Length A
(inch (mm))
Length B
(inch (mm))
Length C
(inch (mm))
RG-6 5/8 (15.9) 1/4 (6.4) 3/8 (9.5)
RG-11 13/32 (10.3) 3/32 (2.4) 13/32 (10.3)