iDirect iQ Desktop+, Инструкция по установке, поддержке и обслуживанию

Страница: 17 / 52

Installation, Support, and Maintenance Guide 5
iQ Satellite Router
Power Specifications
2.2 Power Specifications
The iQ Desktop Satellite Router power specifications are listed in Table 2-2 .
2.3 RF Specifications
The iQ Satellite Router RF specifications are listed in Table 2-3 .
Table 2-2. Power Specifications
Category Description
Power Supply Input Voltage Range
and Power Option 1: 100-240 VAC Single Phase to 24 VDC, 65 W
Option 2: 100-240 VAC Single Phase to 24 VDC, 90 W
Option 3: 65 W DC Power Supply
Frequency Option 1: 47-63 Hz
Option 2: 50-60 Hz
Power Supply Unit Consumption Option 1: 1.4 A (MAX)
Option 2: 1.2 A (MAX)
Option 3: 9 A (MAX)
iQ DC
Consumption Option 1 and 3: 65 W (MAX)
Option 2: 90 W (MAX)
DC Power (Out) @ TX Output
Connector +24 VDC @ 2.3 A (MAX) over operating temperature
DC Power (Out) @ RX Connector 13, 18, 21 VDC @ 500mA (Max)
Protection Internal, inside power supply
Over voltage protection
Over current protection
Short circuit protection
AC Power Cord Supplied, per country of use
Efficiency of the Power Supply Option 1 and 2: 88% (AVG)
Option 3: 87% (AVG)
Input Transient Response 0.5mS for 50% Load Change Typical
Power Supply Input Power
Connector Option 1 and 2: IEC-320-C6
Option 3: Phoenix 1757488
Table 2-3. RF Specifications
Category Description
LNB Support 22 kHz tone for High / Low Band
IF Interface, Impedance Type “F”, Zo = 75 ohms