iDirect iQ Desktop+, Инструкция по установке, поддержке и обслуживанию

Страница: 41 / 52

Installation, Support, and Maintenance Guide 29
iQ Satellite Router
Coax Cable Preparation
Figure B-4. Attaching the Compression fitting F-type Connector
9. Finish connecting the cable to the connector with the compression tool connector, such as
Holland Compression Tool 1855 as shown in
Figure B-5 .
Figure B-5. Compression fitting F-Type Weatherproof Plug and Tool
10. Inspect and ensure that the copper center conductor only protrudes 1/8 inch (3.2 mm)
nominally beyond the rim of the F-connector. Trim if necessary.
NOTE: Since the RG-11 connector has a built-in center pin, ensure that the coax
center pin makes contact to the internal seizing pin of the connector. Refer to
Figure B-4 .
CAUTION: The center conductor length must be a minimum of 1/16 inch (1.6 mm)
to a maximum of 1/8 inch (3.2 mm) protrusion beyond the rim of the F type
connector. It must be straight and cylindrical without any burrs at the end. Failure
to follow this technique could result in damage to the satellite router, BUC, LNB
connector and/or possible intermittent service.