18
iDirect Evolution X5 Satellite Router Installation and Safety Manual
Components Normally Included in an Order
•
Mounting tray for rack installation
•
+24 VDC power supply
•
One high speed Ethernet LAN cable
•
An antenna ranging in size from 0.96m, 1.2m, 1.8m, or 2.4m for Ku-Band; and 1.8m,
2.4m, and 3.8m for C-Band
•
An IFL cable
•
An appropriate feed assembly for the antenna (OMT)
•
A Block Up Converter (BUC); 1W, 2W or 4W for Ku-Band and 2W or 5W for C-Band
•
Optional Ku-Band Power Booster: 8W or 16W
•
Optional C-Band Power Booster: 10W or 20W
•
Low Noise Block converter (LNB)
4.3.1 Additional Components Normally Required
•
An iDirect Specified L-Band cable — Consists of a RG-6 or RG-11 dual-coax cable and
connectors (to connect the IDU and ODU), plus type F connectors and sealant tape. (See
Chapter 4, "Installation" on page 15
•
Non-Pen (Non-Penetrating) Roof Mount
•
Ballast (anchor weight)
A typical antenna with BUC and LNB is shown in
Figure 4. Typical Antenna with BUC and LNB
Note: For instructions on installing your antenna, refer to its manufacturer's
Installation Guide.
Содержание evolution x5
