iDirect Evolution X1, Руководство по установке

Страница: 118 / 130

102 iDirect Satellite Router Installation and Commissioning Guide
iDX Release 3.3
Setting Power
7. If the procedure “Optional Procedure to Determine PN Max Power” on page 88 was
performed:
a. Click the Remote Custom tab.
b. Enter the following Remote-Side custom key:
[UCP]
max_power_level_in_db_pn = <Modulated Max Power>
where
<Modulated Max Power>
is the maximum power determined in “Optional
Procedure to Determine PN Max Power” on page 88 . This is illustrated in Figure 56 .
Figure 56. Setting Modulated Maximum Power Custom Key
8. Click
OK
to save the changes.
9. Right-click the remote in the iBuilder Tree and select Apply Configuration

Reliable Both
(TCP) .
If commissioning a remote in a TRANSEC network and authentication has been disabled,
perform the following steps:
1. If the remote has not yet been issued an X.509 certificate, issue the certificate now. (See
the
iBuilder User Guide appendix “Using the iDirect CA Foundry” for details.)
2. Re-enable authentication on the remote Information tab by clearing the Disable
Authentication check box.
3. Click
OK
to save the changes.
4. Right-click the remote in the iBuilder Tree and select Apply Configuration

Reliable Both
(TCP) .