iDiPOS MS3390, Руководство пользователя

Страница: 16 / 93

9
2 Introduction to installation
2-1 Installing a USB HID keyboard wired terminal
Note: The default interface of the terminal is BT HID Keyboard. Please change the interface to USB HID
Keyboard (See See Data Transfer

USB HID Keyboard).
1. Refer to Figure 2-1, plug one end of the USB cable to the terminal. Plug the other end into the USB
port of the computer.
2. For example: Using Microsoft Windows operation system, the system gives message on “new
hardware found – USB HID input device found”, then driver will be installed on request.
3. After successfully installing the new hardware, message will be given: “hardware installed
successfully and ready to use”.
4. If any problem is encountered during the installation process, unplug the USB cable from the
computer and repeat step 1-2.
Figure 2-1. Diagram of connecting the terminal to PC
2-2 Installing a USB virtual COM wired terminal
Note: The default interface of the terminal is BT HID Keyboard. Please change the interface to USB
Virtual COM.
1.
Refer to Figure 2-1, plug one end of the USB cable to the terminal. Plug the other end into the USB
port of the computer.
2. For example: Using Microsoft Windows operation system, the system gives message on “new
hardware found – USB Virtual COM found” for USB virtual COM, then driver will be installed on
request.
3. After successfully installing the new hardware, message will be given: “hardware installed
successfully and ready to use”.
4. If any problem is encountered during the installation process, unplug the USB cable from the
computer and repeat step 1 to step 2.