Installation & Operator Manual for MDS
L280-0960 Rev. C
11
6.3.5.
Using a Level, measure the Shelf to ensure that it is level and then re-tighten
all four Screws.
6.3.6.
Replace Devices onto the shelf and tuck power or video cords into the side
Channels of the Cart or wrap around cable hooks provided on sides of second
shelf from the bottom.
6.4.
Clean Unit
Tools
: Soft Cloth and one of the following Approved Cleaners:
o
Sodium hypochlorite (generic household bleach) in a solution of 5.25%
sodium hypochlorite diluted between 1:10 and 1:100 with water.
o
Alcohol (generic).
o
Envirocide®
Procedure:
6.4.1.
Unplug the MDS system prior to cleaning the unit.
6.4.2.
Wipe clean the surfaces of the MDS system with a diluted mixture of mild
detergent (listed above) and water using a soft cloth.
NOTE:
For cleaning Video Routers and Monitors, please consult corresponding literature for
these devices. NEVER use alcohol to clean the monitors.
6.5.
Electronics Installation
Procedure:
6.5.1.
All electronic devices are to be installed according to their perspective
manufacturer’s IFU (Information for use) documenation.
