Idex Semrock U-MF2, Быстрый старт

Страница: 4 / 12

Olympus Cube Assembly Procedure
4/11
Step Action
1.1.2.6 Note that there are two distinctly different sides to the retainer rings. One is the flat
(Shoulder) side and one is the open side.
The open side ALWAYS faces into the cube assembly and is tightened
against
the
installed filter. The Shoulder side faces outward. The two sides are shown below for
reference.
Open Side Shoulder Side
1.2 Install the Semrock Filter Set
1.2.1 The diagram below illustrates a cross section of the Olympus cube for use in orienting and
installing the Exciter, Dichroic and Emitter filters into the cube assembly. The cross section
is for reference only, to illustrate filter position and orientation.
Filter Positions
The Emitter is located at the top of the cube assembly. Notice it is mounted at a slight angle.
The Exciter is located at the left
side and the Dichroic is mounted
diagonally at the center of the cube and
shares the Emitter half of the assembly.
Dichroic
Emitter
Exciter