Idex Hale Sam, Руководство по эксплуатации, установке и обслуживанию

Страница: 78 / 141

62
Figure 62. Set The Volume For SAM Speaks
A. To increase speaker volume, touch increase arrow ( ) once for each increase
desired. (Note: Holding the button does NOT continue to increase the volume.)
B. To reduce speaker volume, touch decrease arrow ( ) once for each decrease
desired. (Note: Holding the button does NOT continue to reduce the volume.)
6.2.2.2 Set Camera Names
Enter the Camera Names password (see Table 7, page 51) to rename any (or all) of the video in-
puts. Perform the following to change/set a cameras name.
A.
On Pump Controller, touch and hold system options button until loading icon
completes circle (similar to Figure 21, page 23) and Menu screen is displayed.
B. On Menu screen, touch Password Entry button. (See Figure 50, page 38.)
C. When Enter Password screen is displayed (see Figure 61, page 61), enter Cam-
era Names password (see Table 7, page 51).
D. On Camera Names screen (Figure 63), touch desired name to change/set.
Figure 63. Set Camera Names
E. On keyboard screen (Figure 64), enter desired name as follows.
NOTES
Touch the key to toggle between CAPITAL and lower case letters.
Touch Previous Screen button (see Table 3, page 14) to exit keyboard.
Names are limited to 30 characters.