Idex HALE MIV 2.0, Руководство по эксплуатации, установке и обслуживанию

Страница: 37 / 59

29
4. CORRECTIVE MAINTENANCE
This section provides general repair guidelines, MIV system troubleshooting, and bench repair
instructions for the following MIV components.
•
Valve Disc
•
Switches
•
Relief Valve
4.1. General Repair Guidelines
The following subparagraphs provide general guidelines to be utilized and/or followed whenever
the maintenance procedure being performed is associated with the type of information/ instruc-
tions provided in these subparagraphs.
4.1.1 Recommended Tools
Individual tool and consumable lists are NOT provided for each bench procedure. The following
tools are the minimum required to perform maintenance/repairs on the Manual Intake Valve,
Hale does NOT supply any of the suggested tools listed.
•
Allen Wrenches (or Hex Key Socket Set)
•
Ratchet(s), Sockets, and Wrenches
•
Torque Wrench(s) Or Torque Limiting
•
Shop Rags
Socket(s) (Capable of 0.6 – 1.1 Nm) •
Wire Cutter
•
Wire Tags
4.1.2 Recommended Cleaners
Hale recommends the following:
•
Safety Kleen
•
Stoddard Solvent
•
Loctite Clean-Up Solvent (thread locker/bonder removal for hardware)
4.1.3 Recommended Lubricants
Where grease is called for, use lithium-based grease with 1 to 3% Molybdenum Disulfate. The fol-
lowing lists examples of approved greases.
•
Dow Corning BR2-PLUS
•
Imperial #777
•
Lubriplate Fiske #3000
•
Mobil Grease Special
•
Shell Super Duty Grease
•
Super Lube® Multi-Purpose Synthetic
Grease Food Grade with Silicone or equal
•
Sunoco® Moly #2EP
The lubricant listed in Table 3 is recommended to protect the O-ring from damage, speeds up as-
sembly, and to ensure continued service and operation.