22
©Godiva Ltd. Our policy is one of continuous development. We therefore reserve the
right to amend specifications without notice or obligation.
Gearbox Oil Filling and Level Checking - Horizontal Position, Left or Right of pump
The oil filling point is on the side of the casing (LH gearbox shown) and is symmetrically
opposite for RH gearbox.
The oil level check point is lower on the side. Oil capacity and type as Down position detail.
Fill the gearbox until the oil flows from the oil level check point. This is the only accurate
method of checking that the correct amount of oil has been added to the gearbox, as it allows
for different sizes of gear ratios. Approximate capacity is 1.2 litres.
Pump shown is a Prima SmartCAFS50 unit, the gearbox oil fill and level check points are the
same for the Prima SmartCAFS200 pump.
The oil drain points (pump bearing housing, gearbox and compressor) are located at the front
of the mounting platform., see page 19.
Direction of rotation
–
Clockwise
only
– viewed on
gearbox input drive flange
Oil Level
Check
Oil Fill
Point
Foam
injection
point
–
connect tubing suitable for
22.5 bar pressure
