The Fitzpatrick Company
D6B Manual Ver 1_24 Jan 2012-DRAFT.doc
A Unit of
Corporation
Page 13 of 49
2.2
How to Identify Your Machine
A Model number and Serial number describe each Fitz®Mill Comminutor. These can be
found on your Comminutor Specification Sheet, on the machine nameplate and stamped
directly on the chamber side segment, near the packing gland (shown below). The serial
number stamped on the chamber should be the same as indicated on the machine
nameplate.
The serial number shown on the
Comminutor Specification Sheet
should agree with the
numbers found on the nameplate and the chamber. If they do not, please contact our
Customer Service Department immediately (refer to contact info. in section
7
) so that we
can replace your
Comminutor Specification Sheet
with the correct one or otherwise
resolve the difference. In case of any questions, please supply us with both the chamber
and nameplate serial number(s).
Serial Number will be stamped on the rear-chamber segment, near the packing gland.
Serial Number
Stamped Here
