Idex Corken FD151, Важное руководство по инструкциям

Страница: 33 / 40

FD151 Gas Compressor 33
Appendix H
PART NO. PART NAME
1273 Bearing Adjustment Shim (0.005”)
1273-1 Bearing Adjustment Shim (0.007”)
1273-2 Bearing Adjustment Shim (0.020”)
1275 Oil Filter Screen
1276 Filter Screen Washer
1278 Oil Seal
1279 Breather Cap
1280 Filter Screw
1281 Filter Screen Screw Gasket
1284 Crankshaft Orifice (2)
1285 Bearing Carrier Gasket
1286 Pump Shaft Drive Pin
1290 Relief Valve Adjusting Screw
1291 Adjusting Screw Locknut
1292 Relief Valve Spring
1293 Relief Valve Ball
1302 Oil Pressure Gauge
1368-X Oil Bayonet
1483 Piston Lock Pin - 1/8 x 1”
1500 Bearing Cup
1501 Bearing Cone
1629 Pipe Plug - 1/16 NPT, Flush Seal
1661 Pipe Plug - 3/8 NPT
1671 Flywheel Key
2590 Pipe Plug - 1/8 NPT, Flush Seal
2713 Crankcase Inspection Plate Gasket
2718 Bearing Cup
2719 Bearing Cone
2796 Breather Ball
2798 Pump Cover Pin
2805 Pump Shaft Bushing
2848-X Pump Cover (Includes Pin)
2849-X Oil Pump Assembly
(Individual pump parts not available)
2850 Pump Shaft Adapter
2851 Spring Guide
2852 Oil Pump Spring
2955 Crankcase
2956 Bearing Carrier
2957 Bearing Cover
2958 Crankcase Inspection Plate
3289 Pipe Plug - 1/4 NPT, Flush Seal
4222-X Oil Filter Assembly
4225 Filter
2-011A O-Ring (Relief Valve Adj. Screw)
2-111A O-Ring (Breather Cap)
2-112A O-Ring (Oil Bayonet)
2-112A O-Ring (Pump Shaft)
2-116A O-Ring (Filter Screen)
2-218A O-Ring (Closure Body) (2 Required)
(Spec 3, 4, 8, 9 Only)
2-228A O-Ring (Pump Cover)
7001-025
NC050A Bolt, 1/4-20 x 1/2, Hex Head
7001-037
NC075A Bolt, 3/8-16 x 3/4, Hex Head
7001-037
NC100A Bolt, 3/8-16 x 1, Hex Head
ASSEMBLY ASSEMBLY NAME
NO.
1279-X Breather Cap Assembly with 1279, 2-111A
1341 -X1 Crankshaft Assembly with 1284 (2),1286,1341,
1501,2590,2719
(a) 1342-Xl Extended Crankshaft Assembly with 1284 (2),1286,
1342,1501, 2590, 2719
1368-Xl Oil Bayonet Assembly with 1368-X, 2-112A
1419-2X1 Hydraulic Unloader Assembly (Up to 200 psi )
(Spec 7, 78 Only)
(a) 1419-2X2 Hydraulic Unloader Assembly (200 psi & Above)
(Spec 7, 78 Only)
1515-X Closure Cap Assembly including 2-218A (2)
(Spec 3, 4, 8, 9 Only)
2549-X1 Flywheel Assembly, 16” O.D. 3 Groove with 2549
and 3218 (Not part of Crankcase Assembly) (Not
Shown)
2956-X Bearing Carrier Assembly with 1285, 1290,1291,
1292,1293,1515-X, 2718, 2805, 2806 (2), 2848-X,
2849-X, 2850, 2851, 2852, 2956, 2961 -X,
2-011A, 2-112A, 2-228A.
2957-X Bearing Cover Assembly with 2957 and 1278
2961 -X Air Release Valve Assembly with 2961, 2962, 2963
(a) 3271-X1 Flywheel Assembly, 14” O.D. 2 Groove with 3218
and 3271 (Not part of Crankcase Assembly) (Not
Shown)
4222-X Oil Filter Assembly with 4222, 4225, 2798
(Standard on All Models Starting January 1, 1993)
NOTES:
(a) Optional Equipment
Crankcase Capacity: 1.5 Quarts (1.4
Liters)
Caution: Always relieve pressure in
the unit before attempting any
repairs.