C00169 Hand Tool
Tool Assembly
Parts List
1. To assist in removing threaded parts, apply heat (softens locking compound).
2. When connecting the tension screw to the slide block, clean threads (male and female) of
foreign matter, then apply two drops of medium strength locking compound (Loctite 242 or
equiv.) onto male threads and connect parts together. Apply .03 oz. of food-grade white lubricant
or equiv. to tension screw thread.
3. When connecting the set screw to the cutter bar, clean threads (male and female) of foreign
matter, then apply one drop of medium strength locking compound (Loctite 242 or equiv.) onto
male thread and connect parts together.
4. Kit # C00689 contains the C02078 Assembly and the C03882 Tension Screw. Both parts
should be changed as a set to reduce accelerated wear.
5. Kit # C01899 contains one each of a C01887 band gripper, C03186 gripper spring and
C01787 pin. Replace all parts as a new set to maximize tool performance. Periodic cleaning of
band gripper teeth will improve tool performance.
TOOL FRAME
THRUST BEARING
SLIDE BLOCK
GROOVE LOCK PIN
BAND GRIPPER
TENSION SCREW
GRIPPER SPRING
SPIN GRIP
EXTERNAL RETAINING RING
EXTERNAL RETAINING RING
SCREW RETAINING RING
TENSION HANDLE
CUTTER BAR HANDLE
VINYL GRIP
SET SCREW
(On far side)
CUTTER BAR
SEE SHEET 4 FOR REPAIR PART NUMBERS
1
CABLE JOINTS, CABLE TERMINATIONS, CABLE GLANDS, CABLE CLEATS
FEEDER PILLARS, FUSE LINKS, ARC FLASH, CABLE ROLLERS, CUT-OUTS
11KV 33KV CABLE JOINTS & CABLE TERMINATIONS
FURSE EARTHING
www.cablejoints.co.uk
Thorne and Derrick UK
Tel 0044 191 490 1547 Fax 0044 191 477 5371
Tel 0044 117 977 4647 Fax 0044 117 9775582
