IDEETRON Nexus LoRaWAN, Руководство пользователя

Страница: 4 / 20

Pagina 4 of 20 14-4-2017
Nexus LoRaWAN
3 Introduction
This document describes the commando’s that are implemented in the Nexus_LoRaWAN sketch for
the Nexus board from Ideetron. The sketch is designed for test and demonstration purposes. If you
want to build an autonomous LoRaWAN mote, without a command structure you can use most of
this sketch also.
Find it here:
https://github.com/Ideetron/Nexus_LoRaWAN
4 Default settings
The following settings are the default setting on start-up of the Nexus board.
Radio connection
Modulation LoRa
Channel Tx 868.100 MHz
Datarate Tx SF12 BW 125 kHz
Channel Rx 869.525 MHz
Datarate Rx SF9 BW 125 kHz
Device Address
DS2401 unique number
Network session key 2B7E151628AED2A6ABF7158809CF4F3C
Application session key 2B7E151628AED2A6ABF7158809CF4F3C
Mote Class
A
Confirm No
Channel Hopping No
DevEUI
00 00 00 00 00 00 00 00
AppEUI 00 00 00 00 00 00 00 00
Application key 2B7E151628AED2A6ABF7158809CF4F3C
Table 1: Default settings
See chapter 7 if you want to change these settings.
Serial communication
Datarate 9600 bps
Number of data bits 8
Parity None
Number of stop bits 1
Table 2: Serial communication specifications