50
11.6
Outgoing Message (OGM)
When the answering machine answers a call, the pre-recorded outgoing
message is played to the caller unless you have recorded your own
outgoing message.
The phone comes with two pre-recorded outgoing messages (OGM) for
the respective answer modes: ANSWER ONLY and ANSW. &RECORD.
By default, the answer mode is ANSW.&RECORD, which allows a caller to
leave a message on the answering machine after hearing the
announcement. This can be changed to ANSWER ONLY mode, which
does not allow callers to leave any messages on the answering machine
after hearing the announcement.
11.6.1
Record a Personalised Outgoing Message
You can choose to replace the default OGM with your own personalised
messages.
1.
From the home screen, press
M
.
2.
Press
+
/
-
to ANSW MACHINE and then press
M
to select.
3.
Press
+
/
-
to RECORD OGM and then press
M
to
select.
4.
Press
+
/
-
to select ANSWER ONLY or ANSW.&RECORD
and then press
M
to confirm.
5.
Press
+
/
-
to RECORD OGM and press
M
.
•
A confirmation tone is played.
6.
Speak into the handset to start recording your new outgoing
message and press
M
again to end the recording.
•
A confirmation tone is played.
7.
Press
O
to return to standby mode.
Note: The maximum length of an outgoing message is 2 minutes.
