42
10
ADVANCED SETTINGS
10.1
Handset Registration
IMPORTANT: When you purchase your phone system, all handsets are
already registered to your base, so you do not need to register them.
Handset registration is only necessary when you buy extra handsets or if
a handset has become faulty.
You can register up to four handsets to one base station, with each
handset’s number (1 to 4) shown on its display.
Note: Each handset can only be registered to one base.
You need to enter the Master PIN before you can register or unregister
handsets. The default Master PIN is 0000.
10.2
Register Additional Handsets
1.
Press and hold the key under the base unit for approximately 5
seconds.
•
The message indicator on the base will flash for up to 1 minute,
while it is in registration mode.
2.
On the handset, press
M
.
3.
Press
+
/
-
to ADVANCED SET and then press
M
to select.
4.
Press
+
/
-
to REGISTRATION and then press
M
to select.
•
If no action is taken on the handset within 10 seconds, the
registration
procedure will be aborted. If this happens, repeat
from step 1.
5.
Enter the Master PIN and then press
M
to confirm.
Note: The default Master PIN is 0000.
•
WAITING
flashes on the screen.
•
A confirmation tone is played to
indicate successful registration,
and the handset will return to standby mode, with its handset
number displayed.
•
If no base is found with the entered PIN, error tones are played
to indicate failed registration and the handset returns to
standby mode. You will need to repeat from step 1 above.
