58
Intercom and transfer
“I can’t transfer a call”
Make sure that the other handset is in range of the base unit.
Make sure that you have entered the correct number for the other
handset.
Batteries
“The handset’s battery cells are running low within an hour or two”
Before you first use the handset, you must leave it to charge on the
base unit or charging cradle for at least 15 hours.
You may need to replace the batteries.
Check the connection between the base unit and the mains power
socket.
“I try to recharge the batteries but I still get a warning that they are
low”
You need to replace the batteries. Dispose of used batteries safely –
do not burn, immerse them in water, disassemble, or puncture the
batteries.
Do not use non-rechargeable batteries in your handset – they may
explode, causing damage.
Registration
“I am not able to register another handset”
The maximum number of 4 handsets has been reached. You will need
to unregister a handset in order to register a new one.
Answering Machine
“The Answering machine does not record messages”
Make sure that the answering machine is switched on.
Make sure that the Answer Mode is set to ANSW. &RECORD.
The memory may be full. If so, you will need to delete some messages.
“I cannot access my answering machine remotely”
Make sure that Remote Access is activated.
Make sure that you have entered the correct Remote Access PIN
(same as your Master PIN).
