10
Switching on and off
To switch the
handset on
and off
To switch the handset off (in case you need to
save battery power when the handset is away
from the base unit):
◗
Press the
HANG UP
button and hold it for
4 seconds
To switch the handset back on:
◗
Briefly press the
HANG UP
button,
or replace the handset on the base unit or
Notes
■
When the handset is switched off, it can’t be used for
making calls,
including emergency calls
.
■
When the handset is switched off, it won’t ring for
incoming calls, but the base unit will ring. To answer a
call when the handset is switched off, you need to
switch it back on. It may take a few moments for the
handset to re-establish a radio link with the base unit.
Help Line:
0845 345 9677
(Local Call rate)
11
charger pod
Making and answering calls
Using the
speakerphone
You can switch between speakerphone and
earpiece mode during calls at any time by
button. The display will show if speaker on.
To make a call
1
Key in the telephone number
If you make a mistake, press the soft key
<=I
to clear digits one by one from the display.
2
Press the button
(You can dial the number after you press the
button to get Dial tone if you prefer,
but you can’t correct any mistakes if you do it
this way. If you press the
button before
you dial, the display shows [calling].
To answer a
call
When there's an incoming call,
◗
Press to answer the call
To end a call
◗
Press the
button
The IN USE light on the base unit will goes out
◗
Or just replace the handset on the base unit
Press the
á
or
â
button to adjust volum
when speaker is on, there are three
volume levels.
The speakerphone won't work if the battery is low.
!
Or you can press right soft key
Silence
to
make handset silence, if you don't want to
◗
è
answer the call.
