54
Help Line:
0845 345 9677
(Local Call rate)
55
Guarantee and service
The iDECT K1 is guaranteed for 12 months from the
date of purchase shown on your sales receipt. The Guar-
antee does not cover damage by misuse or negligence,
or by excessive voltages — for example, faults on the
telephone line, or lightning.
Please keep your sales (till) receipt — this is your
guarantee
. You should also keep the original packaging
material.
In the unlikely event that you need to return your
iDECT K1 to our Repair Centre while it is under
guarantee, there will be a £5 handling charge.
While the
unit is under
Guarantee
1 Disconnect the base unit from the telephone line and
the mains electricity supply
2 Pack up all parts of your iDECT K1, using the original
packaging. Remember to include the mains adapter
3 Return the unit to the shop where you bought it,
making sure you take your sales receipt
After the
Guarantee
has expired
If the unit is no longer under Guarantee, first follow
steps 1 and 2 as for repair under Guarantee. Then …
3 Call our Service Department on
0845 345 9677
and ask
for a quotation of the repair charge and details of where
to send your iDECT K1 for repair
4 Make sure you include with your iDECT K1:
■
your name and address
■
a cheque or postal order for the value of the repair
charge
5 Return your iDECT K1 to the address given by the
Service Department
Binatone Telecom plc operates a policy of continuous product
improvement, and so reserves the right to make changes to the
product and functions without notice.
Technical details
Standard
Digital Enhanced Cordless
Telecommunications (DECT)
Frequency range
1.88 to 1.9 GHz (bandwidth = 20 MHz)
Channel bandwidth
1.728 MHz
Operating range
up to 300 m outdoors; up to 50 m
indoors
Operating time
standby: 150 hours approx.
talking: 15 hours approx.
battery charge time: 15 hours
Temperature range
Operating 0 ºC to 40 ºC
Storage -20 ºC to 60 ºC
Electrical power
Handset
— two AAA-size NiMH 750mAh
rechargeable batteries
Base unit/charger pod
— input 230 V AC, 50 Hz; output
AC 6 V, 300 mA
Port specification
The
port (connected to the mains
power supply) is a SELV port with respect to EN41003.
The
port (connected to the telephone line) is a TNV
port with respect to EN41003.
PBX compatibility
Timed break recall: programmable as
100 ms (recommended for most PBX systems) or 250 ms.
Pause length: 3 seconds. Signalling type: DTMF (dual-tone
multifrequency), also called tone dialling.
Network connection
This equipment is intended to be
used in the UK only. Operation on other countries’ PSTN
termination points cannot be guaranteed.
