IDEC WB1F Support Tool, Руководство пользователя

Страница: 30 / 39

4-1
4
Appendix
This chapter gives troubleshooting information and the ASCII code table.
4. 1 Troubleshooting
If a problem occurs while using the WB1F Support Tool, please check the following items.
If you cannot resolve the problem, contact our technical support.
4. 1. 1 Cannot connect to the WB1F Support Tool
„
Are the WB1F and WB1F Support Tool communication conditions the same?
Open the WB1F Support Tool connection settings screen and check the communication conditions.
4. 1. 2 Communication port is not displayed
„
Is the WB1F correctly connected?
Check if the computer and the WB1F are correctly connected.
„
Has the communication port been recognized in Device Manager?
Check the communication port that the WB1F is connected to in Device Manager.
„
When using the USB type, has the device driver been installed?
Check that the device driver has been correctly installed.
„
When the RS-232 type is connected using a RS-232-to-USB conversion cable, has the device driver for the RS-
232-to-USB conversion cable been installed?
Check that the device driver has been correctly installed.
„
If the problem is not resolved by trying the above
Try the following procedure.
1
Exit the WB1F Support Tool.
2
Turn on the power supply for the WB1F again.
(Turn off the power supply, then tun it back on again.)
3
Start the WB1F Support Tool.