background image

 

IDEC SmartRelay Manual

 

i

 

Preface

 

Dear customer

We thank you for purchasing IDEC SmartRelay and congrat-
ulate you on your decision.

IDEC SmartRelay can be used in many fields of applications. 
Due to its high functionality and yet easy operation the IDEC 
SmartRelay offers you highly efficient economies for almost 
any application. 

 

Purpose of this manual

 

This IDEC SmartRelay manual provides you with information 
about the creation of circuit programs, about the installation 
and use of IDEC SmartRelay FL1C devices and expansion 
modules, and about their compatibility to the previous FL1B 
versions (FL1x are the last four characters of the type num-
ber and differentiate the device series).

 

IDEC SmartRelay's place in information technology

 

The wiring information in your IDEC SmartRelay manual is 
also found in the IDEC SmartRelay Product Info included 
with all devices. For further information on programming the 
IDEC SmartRelay on your PC, with the PC in the Online Help 
for WindLGC.
WindLGC is the programming software for PCs. It runs un-
der Windows

 

 

 and helps you to get started with IDEC 

SmartRelay and to write, test, print out and archive your 
programs, independent of the IDEC SmartRelay.

 

Guide

 

We have divided this manual into 9 chapters:

Getting started with IDEC SmartRelay

IDEC SmartRelay installation and wiring

Programming IDEC SmartRelay

IDEC SmartRelay functions

Configuring IDEC SmartRelay

IDEC SmartRelay memory cartridge (card)

IDEC SmartRelay software

Applications

Appendix

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Содержание SmartRelay Series










































































































































































































































































































Отзывы: