background image

 

Sensors

 

SA1J : Full Color Recognition

 

 

 

 

 

Introducing a cost-effective solution for full color sensing applications — SA1J 
full color recognition sensor. Outstanding benets of the SA1J include an extremely 
high response speed (0.3ms), high resolution, and a very low cost.

Key features of the SA1J color sensor include:

 

• Choice of a 3-color version or a 1-color version

• Fast response (0.3ms) — perfect for sensing complex color marks 

at high speed

• Three LEDs (Red, Green, and Blue) provide a long sensing life

• Easy alignment and targeting using a visible spot

• Set sensor with the touch of a button

• Highly sensitive to variations in color; can distinguish between 

subtle shades of the same color

• Up to 60mm sensing distance

• IP67 rated

 

1-Color Version

3-Color Version

 

General Specifications

 

Power Voltage

 

12 to 24V DC (ripple 10% maximum)
Operating voltage: 10 to 30V DC

 

Current Draw

 

150mA maximum

 

Dielectric Strength

 

Between live and dead parts: 1,000V AC, 1 minute

 

Insulation Resistance

 

Between live and dead parts: 20M

 

 

 minimum (500V DC megger)

 

Operating Temperature

 

–10 to +50˚C 
(performance will be adversely affected if the sensor becomes coated with ice)

 

Operating Humidity

35 to 85% RH (avoid condensation)

Storage Temperature

–30 to +70˚C

Vibration Resistance

Damage limits: 10 to 55Hz
Single amplitude: 0.75mm
2 hours in each of 3 axes

Shock Resistance

Damage limits: 500m/s

2

 (approximately 50G)

5 shocks in each of 3 axes

Extraneous Light Immunity

Sunlight: 10,000 lux maximum
Halogen lamp: 3,000 lux maximum

Material

Housing: Aluminum
Lens: Glass
Cover: Polyarylate 

Degree of Protection

IP67 — IEC Pub 529

Cable

Cable type: ø5.4mm 5-core oiltight vinyl 
cabtyre cable (0.2mm

2

) 2m long 

Cable type: ø5.4mm 7-core oiltight vinyl
 cabtyre cable (0.2mm

2

) 2m long 

Weight 

Approximately 250g

Dimensions (HxWxD)

1.97" x 1.18" x 3.15" (50 x 30 x 80mm)

Accessories

Adjusting screwdriver

SA1J: Full Color Recognition Sensors

TREICHL-ATM Electronic    Auf der Bült 10 - 12      D 41189 Mönchengladbach 

Tel. 02166 958545     Fax 02166 958547 

 

 

 eMail: [email protected]    internet: www.lichtschranke.de

Содержание SA1J-C1NQ









Отзывы: